Slideshow Image 1 Slideshow Image 2 Slideshow Image 2 Slideshow Image 2 Slideshow Image 2
Bottling and Packaging Technologies FRAMAX
You are here » Home » Keg filling technologies
 
WE "KNOW HOW"
Project
Planning & Engineering
Beverage Filling
Technologies
Food Packaging
Technologies
Conveying, Handling,
Packaging & Automation
Beverage Production
& Process Technologies
MODUL BLOCK
Rinsing, filling and closing
technologies in one machine
Keg filling
technologies
 
Contacts
 
 
 

Keg filling technologies

 
KeyKeg Slimline
10/20/30

Lightweight:
10lt: 0.85 kg
(1.87 lb US)
20lt: 1.1 kg
(2.43 lb US)
30lt: 1.5 kg
(3.31 lb US)
 
UniKeg
20/30

Lightweight:
20lt: 1.2 kg
(2.66 lb US)
30lt: 1.5 kg
(3.8 lb US)
 

The machine is constructed on a solid basement entirely made of stainless steel AISI 304 while all product contact parts and service valves are made in AISI 316. The filling process has been designed and engineered specifically in accordance to the guidelines issued by the manufacturer of the KeyKegs®.

Process cycle:

1) Positioning of the KeyKeg on the support surface;
2) The machine carries out a series of checks to allow detecting any faults in the container;
3) The head of the machine is washed and dried prior to filling;
4) Counter pressure filling system with controlled snifting during filling operation;
5) Washing and drying of the filling head after filling;
6) Option for Sterilizing the filling head with steam;
7) Depressurizing;
8) KeyKeg removal;
The machine includes safety devices that allow to
monitor the correct opening of the keg prior to starting the filling. The bag is flushed with CO2 and vacuumed prior to filling-cycle start.
The inner bag is also checked for leaks.
The user also has the possibility to include or exclude certain “optional” steps depending on specific requirements.
All parts in contact with the product can be sanitized with steam.
Colour display included.

TECHNICAL DATA SINGLE HEAD MACHINE
Type of connectors and specifications of each main supply:
• Air connection: thread F 3/8”
• Water Connection: thread M 3/8”
• Steam Connection: thread M 3/8”
• Inert gas connection: thread F 3/8”
• Main drain pipe: thread F 1/2”
• Internal bag drain: hose joint Ø18 mm.
• Product inlet: DN 25 (or to customer requirement)
• Electric power supply: 100:240V 50/60Hz-1PH
• Power consumption single head 0,3kW (0,6kW double head machine)

Single head machine production capacity from 36 to 55 kegs/hour
Double head machine production capacity from 72 to 110 kegs/hour

 
CIP MODE
 
Quick changeover
between SLIMLINE & UNIKEG.
 
Download "KeyKeg® System" brochure
 

WSF-KEG SERIES

 

Multiple heads automatic line
Washing sterilizing and filling machine for BEER kegs 20/25/30/50 liters capacity,

The machine is available in single head semiautomatic version for a production rate of 20/25 Kegs/hour of 25 lt. or twin head for higher output of 30 to 40 kegs/hour.

Multiple-head fully automatic lines available for higher speed requirements, including auxiliary equipment for full automation, custom built according to customer requirements.

 
Twin head automatic model
 
Single head semiautomatic
Download "WSF-KEG SERIES" brochure
 
 
 
 
Framax FRAMAX srl - Via Marlianese, 31
51030 Serravalle Pistoiese (PT) Italy
Ph./Fax +39 0573 51435 - Fax +39 0573 079907
email: info@framax.com

© Copyright FRAMAX S.r.l. - All right reserved
C.F./PIVA 01184350476 - DISCLAIMER

Web concept by Campbell adv